250cc TORQUE Level 3 CF

Shorty Clutch and Vented Variator CN250 upgrade kit
Click To Enlarge
  • Item #: 250cc TORQUE 3 CF
  • Manufacturer: KidNme
Price $447.00
ON SALE! $350.00
Availability Call to Order

CFMoto 250cc "Torque Series Level 3
Want a serious upgrade that gets you a lot of torque for less?
Quicker Take off and better hill climbing for your CF250 go kart or Scooter!

You get this entire kit for the same cost of just one of those other Clutches alone!
An awesome upgrade that's simple to install (We'll show you how!) without messing with your motor and at this price, how can you not?

Comes with our:
CFMoto 250 Performance Variator Kit
(5-1/2" Fixed Fan) w /*20gram Rollers to add some pep to your step with a much better take off and stronger hill climbing. Better low end torque!

AND

Our 1500rpm Torque Spring (O.D. 65mm (2.5")
keeps you in "1st gear" longer adding to your low end torque and pushes the rear pully closed quicker to help you come out of corners at a higher rpm!

Most stock 250cc vehicles typically come with a 1000rpm, (65mm o.d) main spring installed.
There are some vehicles (Kymco & others) that take a 68mm OD spring. (2.7") The 68mm spring is special order, please call for availability before ordering.

AND

Our Patented Rebuildable,
Shorty Racing Clutch & Performance Bell kit

OUR CF250cc Shorty Clutch Kit =

A KNM exclusive, close to 2LBS lighter than your stock clutch, it spools up from low to high quicker!!
(3), 1500rpm arm springs pre-installed that add to your low end torque and your friends envy! Provides a higher RPM takeoff speed and gives you greater hill climbing ability without changing another thing! Simple!
AND, it's REBUILDABLE TOO for a fraction the cost of replacing it every time!
It's the last clutch you'll ever need!


This Kit Fits most other CF250 Buggies and Scooters such as the newer model Hammerhead (After 2006 w/ Hi/Lo), Joyner and gokarts with the CFMoto 250 engine and most Scooters with the CF250 motor!

*Check the center holes on your bell housing and clutch for proper fit.
Our CF250 Shorty bell housing center hole has 19 splines and has a 14.7mm I.D
Our CF250 Shorty clutch center hole is 24mm, flat to flat.

 

* Add more 23x18 sets of roller or slider weights to this kit for some real tuneability!

learn more about these parts and how easy it is to install and set up with our
step by step "How-To" videos in "KidNme Garage"

Reviews (0) Write a Review
No Reviews. Write a Review